One Machine. Infinite Geometries.
Are you struggling to clean complex castings or large welded structures? Traditional tumble blasters aren’t always the answer—especially when part-on-part collision isn’t an option.
Meet the Hanger Type Shot Blasting Machine: the ultimate “all-rounder” for your finishing department. By suspending workpieces on a rotating hook, we ensure 360° coverage for castings, forgings and welding parts.
Not All Parts Can Be Cleaned the Same Way
In real foundry and fabrication workshops:
- castings have complex geometry
- forgings are heavy and dense
- welded parts have uneven surfaces
👉 One cleaning method cannot solve all.
The Real Challenge in Surface Cleaning
Common problems:
- dead zones in complex structures
- surface inconsistency
- collision damage in tumble machines
- heavy manual grinding workload
👉 Result:
- poor coating adhesion
- unstable product quality
- increased labor cost
Why Hanger Shot Blasting Equipment Is Different
This equipment is designed for:
👉 precision cleaning of medium to large parts
✔ No Impact Damage
Workpieces are suspended individually:
- no collision
- no deformation
- no surface damage
✔ Multi-Angle Cleaning Coverage
- rotating hooks
- optimized impeller layout
👉 ensures full surface exposure
✔ Stable Surface Quality
- uniform shot distribution
- consistent roughness
✔ Reduced Manual Finishing
👉 less grinding, less labor
Working Principle (Engineer Explanation)
Step-by-Step Process
- Parts are loaded onto hanger hooks
- Conveyor transfers them into blasting chamber
- Hooks rotate at controlled speed
- Turbines throw high-speed steel shots
- Surfaces are cleaned from all directions
- Abrasive is recycled through separator
- Dust is removed by filtration system
- Clean parts are unloaded
👉 Key design logic:
Controlled rotation + directional blasting + abrasive recycling
Technical Parameters (Typical Configuration)
| Parameter | Value |
|---|---|
| Hook Load Capacity | 500–3000 kg |
| Impeller Power | 7.5–22 kW |
| Shot Flow Rate | 120–250 kg/min |
| Cleaning Time | 5–20 min |
| Hook Rotation Speed | 2–6 rpm |
| Dust Emission | ≤20 mg/m³ |
Standards reference:
- American Foundry Society
- ISO 8501-1
- ISO 11124
What You Gain in Production
✔ Better Coating Performance
- improved adhesion
- longer service life
✔ Higher Cleaning Efficiency
- automated process
- batch operation
✔ Consistent Product Quality
👉 every part meets the same standard
✔ Lower Overall Cost
- reduced labor
- reduced rework
- optimized abrasive usage
Ideal Applications
This machine is widely used for:
✔ Castings
- gray iron
- ductile iron
- steel castings
✔ Forgings
- heavy-duty components
- high-strength parts
✔ Welded Structures
- steel frames
- fabricated assemblies
👉 Especially suitable for:
- complex shapes
- medium to large sizes
- high-quality surface requirements
Comparison with Other Machines
| Machine Type | Limitation |
|---|---|
| Tumble | causes collision damage |
| Roller Conveyor | not suitable for complex parts |
| Table Type | limited size capacity |
| Hanger Type | ✔ best for complex & valuable parts |
Why Our Equipment Stands Out
✔ Optimized Turbine Layout
- higher blasting efficiency
- lower energy consumption
✔ Durable Structure
- wear-resistant liners
- long service life
✔ Reliable Conveyor System
- stable hanger movement
- low failure rate
✔ Efficient Abrasive Recycling
- reduces waste
- maintains performance
Typical Buyer Mistake
Most buyers focus on:
- price
- machine size
But ignore:
- blasting angle design
- rotation system
- real cleaning uniformity
👉 Result:
Machine runs… but quality is unstable.
When You Should Upgrade
If you are facing:
- uneven cleaning
- damaged parts
- high manual workload
- low coating quality
👉 It’s time to upgrade your equipment.
What We Provide (Not Just Equipment)
When you contact us, you get:
✔ customized blasting solution
✔ machine configuration design
✔ workshop layout advice
✔ full technical support
Real Engineering Insight
In surface treatment:
👉 Machine determines efficiency
👉 Process determines final quality
👉 Get Your Customized Solution Today
To recommend the right model, we need:
- part size & weight
- material type
- daily production capacity
- surface quality requirement
👉 We will provide:
✔ equipment selection
✔ technical proposal
✔ detailed quotation
High-Conversion Call to Action
👉 Stop damaging your parts
👉 Stop wasting labor on grinding
👉 Upgrade to automated precision cleaning
Contact us now — get expert solution within 24 hours
Whatsapp+8618765972210